Mapping the research landscape of bauxite by-products (red mud): An evolutionary perspective from 1995 to 2022.

The global population growth has significantly impacted energy and raw material consumption, unmatched since the Industrial Revolution. Among metals, aluminium ranks second only to steel, with annual production exceeding 69 million tonnes. Due to its high demand, bauxite, the primary ore from which aluminium is extracted, is now classified as a critical material in the EU and the US, given the potential risk of supply shortages for essential applications. Geographical and production challenges surround bauxite, presenting geo-economic and environmental challenges. A critical concern in aluminium production is managing by-products, notably red mud, a bauxite residue, generating over 175 million tonnes annually worldwide. Comprehensive bibliometric research is imperative due to the high amount of bibliographical resources related to this topic, encompassing circular economy, re-valorisation, sustainability, and disposal. This study employs bibliometric methods to assess red mud valorisation, offering insights into research topics, influential authors, and key journals, shedding light on the past, present, and future of red mud research. Such bibliometric analysis not only highlights the current state of the field but also serves as a valuable tool for decision-making, enabling researchers and policymakers to identify trends, gaps, and areas for further exploration, fostering informed and sustainable advancements in the by-products of the aluminium industry.

A Decarbonization Approach for FeCr Production.

In this study, the reducing smelting of chromite concentrates by EAF-assisted metallothermic method was investigated. The effect of AlPowder and AlDross addition amount, time, and the ratio of flux addition on the produced metal and slag compositions and metal recovery were investigated. It was seen that ferrochrome can be produced from fine-grained chromite concentrate by this method. As a result of EAF-assisted semi-pilot metallothermic smelting, the highest chromium content in produced alloys was 59.5 wt. %, while the highest chromium recovery from chromite concentrate to alloys was 76.7 wt. % in these experiments.

Utilization possibilities of steel slag as backfill material in coastal structures.

The aim of this study is to investigate the utilization possibilities of steel slags, basic oxygen furnace (BOF) and electric arc furnace (EAF) slags, as backfill material in coastal structures. Within the scope of the study, physical, mechanical and chemical properties of the steel slags were investigated and their potential to create environmental risks were evaluated. The results showed that soundness loss and filler content ratio were below the limit values for steel slags to be used as backfill material. It was determined that the density, porosity, water absorption and Los Angeles abrasion ratios of steel slags were generally higher than natural aggregates. In order to reach the California Bearing Ratio (CBR) limit (> 25%), the maximum particle size of the steel slag was reduced to 25 mm. In this particle size, CBR of the slag samples generally gave better results compared to the natural aggregate (38%), except for Kardemir and Asil samples. In addition, the concentration values of heavy metals (Cu, Cd, Cr, Pb, Ni, Zn, Hg and As) were below the limit values specified in the regulation. It is suggested that EAF slags should be aged for at least 6 months and BOF slags for at least 24 months in open air conditions before being used as backfill material in coastal structures after the maximum particle size is reduced to 25 mm.

Spark plasma sintered Al2O3-YSZ-TiO2 composites: processing, characterization and in vivo evaluation.

Al2O3 and Al2O3-YSZ composites containing 3 and 5 wt.% TiO2 were prepared by spark plasma sintering at temperatures of 1350-1400°C for 300s under a pressure of 40 MPa. The grain growth of alumina was suppressed by the addition of YSZ. Al2O3-YSZ composites showed higher hardness than monolithic Al2O3. There was not a considerable difference in hardness values for Al2O3-YSZ composites containing 10 and 20 vol.% YSZ and the addition of TiO2 decreased the hardness of the composites. The fracture toughness of Al2O3 increased from 2.8 MPa·m(1/2) to 4.3 MPa·m(1/2) with the addition of 10vol.% YSZ, further addition resulted in higher fracture toughness values. The fracture toughness values were increased with TiO2 addition and the highest value of fracture toughness, 5.3 MPa·m(1/2), was achieved with the addition of 20 vol.% YSZ and 5 wt.% TiO2. Preliminary in vivo tests demonstrated the biocompatibility and osseointegration of the composites after 6 week post-implantation in femur of Wistar rats.